Name: Rider R2 3.0
Brand: Fatetimes
Availability: OutOfStock

Rider R2 3.0

$0.00

Rider R2 3.0

$0.00

[Template]

Precision aluminum. Panoramic glass. Uncompromised power. The Saber M6i is a 12-liter mini-tower engineered for builders who demand a showcase aesthetic without sacrificing performance. CNC-machined entirely from aluminum and wrapped in dual tempered glass panels, the M6i delivers the coveted "fish tank" look while supporting full-length GPUs, potent air cooling, and a direct-plug ITX layout—no riser cables required.

Key Highlights

Full Aluminum CNC Chassis — 3.5 kg of precision-machined metal
12L Compact Footprint — Mini-ITX / DTX direct-plug motherboard layout
Dual Tempered Glass Panels — Panoramic "sea-view" showcase aesthetic
Up to 316mm GPU Support — SFF-Ready standard compatible, 2.5-slot clearance
135mm CPU Air Cooler Clearance — Room for high-performance low-profile towers
Optimized Thermal Layout — 1× 140mm top exhaust + 1× 92mm rear intake
SFX / SFX-L PSU Support — Flexible power options with clear fitment rules
Hidden Power Button — Clean, minimalist front face with discreet switch placement
Available in Black & White

GPU Compatibility

The M6i is designed for serious graphics power in a compact footprint. Maximum clearance:

316 × 133 × 52 mm
(Length × Height × Thickness)

Length: 316 mm (measured without bracket)
Thickness: 52 mm — approximately 2.5-slot cards
Width: 133 mm clearance from motherboard plane

Compatible with the NVIDIA SFF-Ready GPU size standard.

⚠️ Important Note: NVIDIA Founders Edition RTX 5080 and RTX 5090 cards may experience side-panel clearance issues due to the 12VHPWR adapter orientation and power connector exit position. Please verify your specific card dimensions and connector layout before purchasing.

Cooling & Airflow Design

Despite its compact 160 mm width, the M6i supports a robust dual-fan cooling strategy:

CPU Cooler: Air coolers up to 135 mm tall
Top Fan: 1× 140 mm (14025) — primary exhaust
Rear Fan: 1× 92 mm (9025) — CPU intake

Recommended airflow: Configure the rear 92 mm fan as CPU intake and the top 140 mm fan as exhaust to create a direct rear-to-top thermal path, efficiently evacuating heat from both the CPU and GPU zones.

PSU Compatibility — Critical Fitment Rules

The M6i accepts SFX and SFX-L power supplies, but strict dimensional and orientation rules apply. Failure to follow these will prevent proper installation:

Form Factor	Dimensions	140mm Top Fan
SFX	125 × 100 × 63.5 mm	✅ Compatible
SFX-L	125 × 125 × 63.5 mm	❌ Not Compatible

Orientation: The PSU fan must face inward toward the chassis interior. Fan-facing-outward orientation is incompatible.
Extension Cables: Ensure your power extension cable plug direction does not interfere with the side panel or internal hardware.
Cable Type: Braided or sleeved custom modular cables are not recommended due to tight internal clearances. Use unsleeved or thin-gauge cables for the best fit.

Custom Cable Length Guide

For the cleanest possible build, we recommend custom-length unsleeved cables. The following lengths are measured without connector housings and are based on typical ITX layouts—adjust according to your motherboard's power connector positions:

Cable	Length	Routing
Motherboard 24-pin	23 cm	—
CPU 8-pin	36 cm	—
GPU 12VHPWR	12 cm	Top routing
GPU 12VHPWR	26 cm	Bottom routing

Technical Specifications

Model	Saber M6i
Color	Black / White
Chassis Volume	~12 Liters
Dimensions (Case)	325 × 160 × 246 mm (L × W × H)
Package Dimensions	375 × 270 × 55 mm
Case Weight	3.5 kg
Package Weight	4.0 kg
Motherboard	Mini-ITX (17×17 cm), DTX (17×19 cm)
GPU Clearance	316 × 133 × 52 mm (L × H × T)
CPU Cooler	Air cooling up to 135 mm
PSU Form Factor	SFX / SFX-L (see compatibility notes above)
Fan Support	14025 × 1 (top) / 9025 × 1 (rear)
Drive Bays	None (M.2 / SSD recommended)
Front I/O	None (clean minimalist faceplate)
Power Button	Hidden / discreet placement